7items
Monitor Keyboard Mouse Phone 3D Printing RC Cars

Keyboard

Switches, actuation, and latency, measured on the boards people type and game on all day.

  • ◀︎
  • 1
  • 2
  • 3
  • 4
  • 5
  • ▶︎
Milky Pearl Boba U4 switch being pressed into a hot-swap keyboard PCB beside seated switches and a keycap

Gazzew's Boba U4 silences the keystroke without the mush

The Boba U4 silent tactile switch keeps a sharp D-shaped bump while muting the clack. A dampened stem stays tactile, and 62g or 68g sets the feel.

Cutaway mechanical keyboard switch showing a multi-stage spring with tight coils at the top and loose coils at the base beside a rising force curve

Multi-stage springs give the Gateron Pro 2.0 a rising force

Multi-stage springs bend a switch force curve into a rising ramp. See how the Gateron Pro 2.0 Silver presses and why a 60g label hides the shape.

A mechanical keyboard PCB with rows of black hot-swap sockets and an amber switch lowered into one socket by tweezers

Rated for 50,000 swaps, Gateron's 2.0 socket outlasts Kailh

Gateron's hot-swap 2.0 socket is rated for 50,000 swaps against Kailh's 100, but pin damage kills far more sockets than swap counts ever will.

Cream WS Flux mechanical keyboard switches on a dark circuit board, one black keycap lifted off its cross stem

Below 0.3mm stem wobble the WS Flux switch feels locked in

Stem wobble under 0.3mm at the keycap stops bothering most typists, and the WS Flux targets 0.05mm. See the wobble ladder and what a loose stem costs.

Krytox GPL 205 GD0 grease syringe on a workbench beside disassembled keyboard switch housings, stems, springs and a lube brush

Brush Krytox 205g0 on the stems and 105 oil on springs

Krytox 205g0 grease belongs on switch stems, 105 oil on springs. Get the part-by-part lube map, the over-lube risk, and whether hand lubing pays off.

Cutaway magnetic keyboard switch on a green circuit board with a magnet in the stem, a sensor chip below it, two precision scales and power traces running to a battery icon

Gateron TMR keys draw 40x less power than Hall effect

TMR switch power draw runs about 40x lower than Hall effect, and TMR reads travel to 0.01mm. That gap is what makes wireless magnetic boards work.

  • ◀︎
  • 1
  • 2
  • 3
  • 4
  • 5
  • ▶︎

Popular

Krytox GPL 205 GD0 grease syringe on a workbench beside disassembled keyboard switch housings, stems, springs and a lube brush

Brush Krytox 205g0 on the stems and 105 oil on springs

Krytox 205g0 grease belongs on switch stems, 105 oil on springs. Get the part-by-part lube map, the over-lube risk, and whether hand lubing pays off.

A mechanical keyboard PCB with rows of black hot-swap sockets and an amber switch lowered into one socket by tweezers

Rated for 50,000 swaps, Gateron's 2.0 socket outlasts Kailh

Gateron's hot-swap 2.0 socket is rated for 50,000 swaps against Kailh's 100, but pin damage kills far more sockets than swap counts ever will.

Grey concrete Keychron K2 HE beside a black resin edition with swirling flow patterns and RGB-lit keys

Concrete and resin recast the Keychron K2 HE housing

Keychron K2 HE concrete and resin editions share the same PCB, switches, and plate, so the case is the one variable you can hear and test.

Milky Pearl Boba U4 switch being pressed into a hot-swap keyboard PCB beside seated switches and a keycap

Gazzew's Boba U4 silences the keystroke without the mush

The Boba U4 silent tactile switch keeps a sharp D-shaped bump while muting the clack. A dampened stem stays tactile, and 62g or 68g sets the feel.

Black ROG Azoth 96 HE keyboard on a dark desk mat, angled three-quarter view with WASD keys lit and the side OLED screen glowing

0.4mm rapid trigger stops the Azoth 96 HE double-firing

Rapid trigger actuation tuning per key on the Azoth 96 HE, with a published profile and a test that finds the tremor floor where double inputs start.

Corsair Makr Pro 75 keyboard with black aluminium case, white keycaps, yellow ESC and Enter keys, and a top-right rotary knob

14 screws stiffen the Corsair Makr Pro 75 gasket mount

The Corsair Makr Pro 75 gasket mount stiffens under 14 standoff screws and 200g of foam, so a gasket only softens typing when the plate can move.

Like what you read?

Subscribe to the weekly 7items newsletter and get new posts by email.

2026 7items
Site Newsletter Privacy Policy Terms of Service Contact
Categories Monitor Keyboard Mouse Phone 3D Printing RC Cars