7items
Monitor Keyboard Mouse Phone 3D Printing RC Cars

Keyboard

Switches, actuation, and latency, measured on the boards people type and game on all day.

  • ◀︎
  • 1
  • 2
  • 3
  • 4
  • 5
  • ▶︎
A hand laying a black Poron foam sheet into an empty keyboard case beside the assembled keyboard, keycap puller and screwdrivers

Poron case foam warms your keyboard without deadening it

Poron case foam warms a hollow keyboard and cuts ping without deadening it. See the three-layer thock recipe and the 200g overdose that kills sound.

Two Razer Huntsman V3 HE keyboards, a 65 percent Mini in front of a tenkeyless, both lit with rainbow RGB and plugged in by braided cables

The Huntsman V3 HE hits a true 8,000Hz through a cable

True 8,000Hz keyboard polling is wired only in 2026, and the reason is radio airtime and battery life. The 0.875ms gain is worth less than it looks.

Illustration of a Keychron K10 HE keyboard with rainbow RGB backlighting on a desk beside an open laptop showing a Linux terminal boot log

Tune the Keychron K10 HE on Linux without vendor software

Configure the Keychron K10 HE on Linux with QMK and VIA. Includes the udev rules that block access, a working keymap and the actuation caveats.

Black ROG Azoth 96 HE keyboard on a dark desk mat, angled three-quarter view with WASD keys lit and the side OLED screen glowing

0.4mm rapid trigger stops the Azoth 96 HE double-firing

Rapid trigger actuation tuning per key on the Azoth 96 HE, with a published profile and a test that finds the tremor floor where double inputs start.

Corsair Makr Pro 75 keyboard with black aluminium case, white keycaps, yellow ESC and Enter keys, and a top-right rotary knob

14 screws stiffen the Corsair Makr Pro 75 gasket mount

The Corsair Makr Pro 75 gasket mount stiffens under 14 standoff screws and 200g of foam, so a gasket only softens typing when the plate can move.

Green FR4 fiberglass keyboard plate emitting soft neutral sound waves beside a silver aluminium plate emitting bright sharp rings

Aluminium plates ring bright where FR4 stays neutral

FR4 vs aluminium keyboard plate sets your typing feel and sound. FR4 flexes and stays neutral, aluminium is firmer, brighter, and rings unless foamed.

  • ◀︎
  • 1
  • 2
  • 3
  • 4
  • 5
  • ▶︎

Popular

Krytox GPL 205 GD0 grease syringe on a workbench beside disassembled keyboard switch housings, stems, springs and a lube brush

Brush Krytox 205g0 on the stems and 105 oil on springs

Krytox 205g0 grease belongs on switch stems, 105 oil on springs. Get the part-by-part lube map, the over-lube risk, and whether hand lubing pays off.

A mechanical keyboard PCB with rows of black hot-swap sockets and an amber switch lowered into one socket by tweezers

Rated for 50,000 swaps, Gateron's 2.0 socket outlasts Kailh

Gateron's hot-swap 2.0 socket is rated for 50,000 swaps against Kailh's 100, but pin damage kills far more sockets than swap counts ever will.

Grey concrete Keychron K2 HE beside a black resin edition with swirling flow patterns and RGB-lit keys

Concrete and resin recast the Keychron K2 HE housing

Keychron K2 HE concrete and resin editions share the same PCB, switches, and plate, so the case is the one variable you can hear and test.

Milky Pearl Boba U4 switch being pressed into a hot-swap keyboard PCB beside seated switches and a keycap

Gazzew's Boba U4 silences the keystroke without the mush

The Boba U4 silent tactile switch keeps a sharp D-shaped bump while muting the clack. A dampened stem stays tactile, and 62g or 68g sets the feel.

Black ROG Azoth 96 HE keyboard on a dark desk mat, angled three-quarter view with WASD keys lit and the side OLED screen glowing

0.4mm rapid trigger stops the Azoth 96 HE double-firing

Rapid trigger actuation tuning per key on the Azoth 96 HE, with a published profile and a test that finds the tremor floor where double inputs start.

Corsair Makr Pro 75 keyboard with black aluminium case, white keycaps, yellow ESC and Enter keys, and a top-right rotary knob

14 screws stiffen the Corsair Makr Pro 75 gasket mount

The Corsair Makr Pro 75 gasket mount stiffens under 14 standoff screws and 200g of foam, so a gasket only softens typing when the plate can move.

Like what you read?

Subscribe to the weekly 7items newsletter and get new posts by email.

2026 7items
Site Newsletter Privacy Policy Terms of Service Contact
Categories Monitor Keyboard Mouse Phone 3D Printing RC Cars